Quick, Simple, Easy, Secure and Portable
The ERGO NAV® adjustable mouse platform is made of durable, High Impact ABSi Plastic.
Velcro Straps are used to mount the ERGO NAV® to the arm of a desk chair. The UNIVERSAL MOUNT system will not damage the chair or arm.
Since it is a simple matter of putting together or pulling apart 3 Velcro Straps, the ERGO NAV® can easily be moved from your desk chair at home to your desk chair at the office.
View/download: Printable instructions (PFD file)
Order your ERGO NAV Today
ERGO NAV® Mounting Instructions
 Step 1
Route Velcro straps through the slots as shown in step 1 photo.
See photo of bottom of Ergo Nav (Step 1 photo) |
 Step 1a
Route Velcro straps through the slots as shown in photo/step 1a.
Close up photo of Step 1 (step 1a) |
 Step 2
Position the non-skid strip on the armrest on which you will attach your ERGO NAV. (No Adhesive required.)
See Step 2 photo
|
 Step 3
Place the ERGO NAV on top of the armrest as shown. Pull the straps tight around the armrest securing the Velcro ends together.
See Step 3 photo.
|
ERGO NAV® Adjustment Instructions
 |
 |
 |
 |
- Side to side tilt angle shown in figure 1 is accomplished by loosening the knob labeled "A" in figure 4.
- The tilting shown in figure 2 requires loosening the knobs labeled "B" in figure 4.
- The adjustment shown in figure 3 requires the removal of knob "A" and reattaching the platform with one of the mounting holes next to knob "A".
- Knobs must be loosened before any adjustments are made and re-tightened prior to use.
The ERGO NAV's platform should be tilted slightly downward and away from your seating position for your comfort.
|
© All content Ergonomic Office Supplies
CAUTION: Never force the mouse platform into position.
Loosen, adjust and tighten the adjustment point(s) as needed. Never put unnecessary downward force on the platform.